Latest Update: 28/10/2021
The below log shows all updates for this product since release:
v1.4.3.2
- Bug Fix: Fixed issue with panel states on 1.4.3.1 installer
v1.4.3.1 Full new build - 07/10/2021
- Bug Fix: Fixed issue with WebSimBrowser for the EFB not installing in some cases
- Bug Fix: Fixed issue with CFD files that prevented the use of CFD
- Bug Fix: Fixed spoiler lever keyboard controls not working after TCA update
- Bug Fix: Fixed TRUE HDG indication on the PFD
v1.4.3.0 Full new build - 24/06/2021
- Bug Fix: Various small fixes in the checklists
- Bug Fix: Corrected the radial in line course
- Bug Fix: Heading line was visible on LOC capture during radial in direct
- Bug Fix: At least one engine has to be started before GW indication is displayed on E/WD
- Improvement: Added support for Thrustmaster TCA custom flaps and speedbrake lever mode (see forum announcement for additional details)
- Improvement: ALT defaults to managed now on the panel states
v1.4.2.1 Stable release
- Bug Fix: Various fixes and improvements in the checklists
- Bug Fix: Fixed radial in course not being correctly aligned
- Improvement: Fuel planner figures adjusted
v1.4.2.0 Stable release
- Bug Fix: Possible fix for EXT PWR not working in some cases then loading and aircraft state
- Improvement: Disabled the function where toe brakes automatically released the parking brake
- Improvement: Bringing checklist functions to the A330 level and other major improvements on the checklist
(for further information about checklist changes check: https://forum.aerosoft.com/index.php?/forum/883-step-by-step-guide-checklists/)
v1.4.0.0 Full new release for P3D V5
v1.3.1.0 - Full new build
- Bug Fix: EFB folder path full unicode support to fix issue with special characters
- Bug Fix: Dive issue when speed increased
- Bug Fix: Small fix for GSmini display
- Bug Fix: After setting altimeter to STD it might have happened that former QNH still was set on according ND altimeter while STD displayed on BARO selector
- Bug Fix: Fix for park brk desync issue in CFD
- Improvement: A/THR response adapted for better turbulence handling
- Improvement: Several small adjustments in ND like heading bug visible with preselected HDG on FCU
- Improvement: Several adjustments with STEP ALTS implementation
- Improvement: Several speed flags and protection speeds and logics improved
- Improvement: Multiple fixes in holdings line drawing
- Improvement: COMs frequency spacing changed from 25kHz to now 8.33kHz
v1.3.0.3 Experimental (only full new build)
- New Feature: EFB with NDP and Navigraph support
- Improvements: Engine start logic Improvement
- Improvements: Pacs logic Improvement
- Improvements: Added SID and Arrival to CFD sync
- Improvements: Changes MCDU menu
- Improvements: Conditions to show rising runway
- Improvements: GSX2 implementation updated
- Improvements: Cabin Crew Announcements - Cabin lights call during climb - Now also considers position of OVH light switch
- Improvements: Minor changes to printout position
- Improvements: Avoiding issues with 3rd party replacement of default files (ohhh please, never do that....)
- Improvements: Changed default bag weight to 25 Kg
- Improvements: Changes to fuel planner so users can edit amount and CG
- Improvements: After GO-AROUND checklist now proceeds (CLIMB or NEW APPROACH)
- Bug fix: Fuel display now correctly colored
- Bug fix: Small issues in CORTE selection and WIND pages
- Bug fix: QNH decrepancy when inHg was selected solved
- Bug fix: MCDU freeze issue solved
- Bug fix: Resetting of APU state avoided
- Bug Fix: Landing call memo now triggered correctly
- Bug fix: Fixes in FPLN page on landing phase
- Bug fix: Further fixes in DES page predictions
v1.3.0.1 Experimental
- Improvements: Reworked YAW bar mode
- Improvements: Cosmetic changes to MCDU
- Improvements: Taxi light intensity issue solved
- Improvements: Fuel Planner fuel calculation adjusted
- Improvements: MCDU fuel calculation adjusted
- Bug fix: Not all doors triggered by GSX
- Bug fix: Yaw bar mode issue solved
- Bug fix: CAT2 issue solves
- Bug fix: Elevator drop issue fixed
v1.3.0.0 Experimental
- Full new build to include A330 technology
v1.2.5.0 - Non experimental
- Bug Fix: Fix wrong calculation of deceleration point in geo descent
- Bug Fix: Several sync issues solved for CFD
- Bug Fix: Fix for doors issues in Turn Around State
- Bug Fix: Fix for incorrect fuel burn from Center tank
- Bug Fix: Retard call prevented on take-off in CFD mode
- Bug Fix: IRS not aligning is some cases fixed
- Improvement: Tweaks to PFD display
- Improvement: 2D MCDU resized to avoid overlapping windows
- Improvement: Tweaks to Procedure Turns
- Improvement: vPilot second radio Rx on/off control from aircraft radio panel added
- Improvement: FADEC logic overhauled to prepare for A330
v1.2.4.2 - Experimental
- Bug Fix: Fixes in STAR loading via CO RTE
- Bug Fix: excessive COMPANY MSG message after loading a saved flight
- Bug Fix: Issues with cockpit printer corrected
- Bug Fix: Diverse issues in IRS INIT corrected
- Improvement: Tweaks to PFD display
- Improvement: Added more align IRS time steps
- Improvement: A few last items synced in Connected Flight Deck
- Improvement: ECAM indication changed from "NO PED" to "NO PORTABLE DEVICES"
- Improvement: Multiple changes to speed management
- Improvement: Refinements to GSX2 implementation
- Improvement: Refinements to Checklists
v1.2.4.1 - Experimental
- Bug Fix: Issue with doors states fixed
- Bug Fix: Incorrect deletion of the DISCON after selecting an approach
- Bug Fix: inHG Altimeter dot added
- Bug Fix: Issues with multiple VORs with same code fixed
- Bug Fix: Prevention of giganormous log files
- Improvement: Finishing GSX2 interaction
- Improvement: Demo of VC objects removed
- Improvement: Possible fix for printer issues
- Improvement: Some tweaks to PFD
v1.2.4.0 - NON EXPERIMENTAL (save your liveries!)
- Bug Fix: Avoiding CTD in Connected Flight Deck
- Improvement: Finishing GSX2 interaction
- Improvement: Refinements to Connected Flight Deck
- Improvement: Vol1 manual updated
v1.2.3.6 - EXPERIMENTAL
- Bug Fix: Added ASC.cfg files missing from 1.2.3.5 update
v1.2.3.5 - EXPERIMENTAL
- Bug Fix: State loading issues solved
- Bug Fix: New versions of Connect Flight Deck (still alpha code)
- Improvement: Further tweaks on GSX2 interaction
- Improvement: Small tweak to VC graphics
v1.2.3.3 - EXPERIMENTAL (Including Connected Flight Deck) Aso indicated as 1.2.3.4
- Bug Fix: Fix in RAD NAV on VOR course
- Bug Fix: Fixes in Loadsheet report, wrong values when not using the Fuel Planner
- Bug Fix: Minor fix on Remote CDU: it might be disabled under certain conditions.
- Bug Fix: Fixes related to magnetic variation on WPTs shown on F-PLN page (multiple leg types)
- Bug Fix: FMGS was totally locked up on PRINT ALL for WX reports
- Bug Fix: Arrival airport data was sometimes unavailable when ALTN is also present, leading to issues like dashed UTC, EFOB etc.
- Bug Fix: Occasional exception when scrolling the ARRIVALS page
- Bug Fix: Fixes in F-PLN page, spd/mach and alt values displayed incorrectly, constraints displayed incorrectly
- Bug Fix: During fire test the engine fault light on pedestal now nolonger comes on
- Bug Fix: ELEC: GEN1+GEN2 "OFF" light logic inverted
- Bug Fix: HYD: ECAM page: Status of HYD pumps inverted
- Bug Fix: CTD happened on HOLD at PPOS
- Bug Fix: Clearing the Flaps/Trim settings on RWY change
- Bug Fix: TO SHIFT clearing manually and also automatically on RWY change
- Bug Fix: PROG page: manually entered required RNP value was being overwritten, and also wrong font size;
- Bug Fix: PSD placement on a curve was incorrect, e.g. LEMD ILS32RZ VIA ASBIN
-Bug Fix: REPORT page: it was totally blank when the arrival airport wasn't selected.
- Bug Fix: CTD on WX request with the wind speed given in other units
- Bug Fix: ACARS: the wind speed from METAR REPORT wasn't converted when storing values (if given in different units, KMH or - MPS)
- Bug Fix: the RNP value wasn't synced with FO MCDU
- Bug Fix: incorrect indication for the RNP value with precision
- Bug Fix: enormous curves on ND caused by invalid navaid coordinates, if navaid isn't present in the active navdata
- Improvement: Connected Flight Deck activated for Open Beta
- Improvement: Tweaks to QNH/STD
- Improvement: More tweaks to PFD
- Improvement: ECAM COND: Temp drop to OAT made faster again when packs are switched off
- Improvement: GCS switch of WXR now springloaded to AUTO position
- Improvement: Multiple changes to DUPLICATES page
- Improvement: Tweaks for GSX2
- Improvement: layout for prints improved
- Improvement: ELEC: Several internal adaptations to match newer BUS logic from A320
- Improvement: Dual Input sounds added
v1.2.3.2 - EXPERIMENTAL
- Bug Fix: Updates of GSX2 compatibility
- Bug Fix: Issues with brake fan sounds solved
- Bug Fix: AUTO ELEV value in CAB PRESS ECAM page was always 100 feet too high, now correct
- Bug Fix: CVR GCTRL logic corrected
- Bug Fix: APU RPM corrected for IAE engines
- Bug Fix: CTD issues with print avoided
- Bug Fix: Flaps/trim now corrected reset on runways change
- Bug Fix: Speed/mach and alt values on F-PLN pages corrected
- Bug Fix: Constrains displays incorrectly
- Bug Fix: Display of MagVar for WPTs on F-PLN corrected
- Improvement: Minor tweaks to PROG and REPORT pages
- Improvement: Minor graphical tweaks to PFD
- Improvement: Minor functional tweaks to PFD
- Added RNP AR capability….L/DEV
- Added DH indication
- Added MDA indication
- Added landing elevation indication
- Added tailstrike pitch indication
- Improvement: Logic behind CPT BARO and ISIS BARO changed
- Improvement: Print margins
- Improvement: ET timers now reset on loading Cold & Dark and Turn Around
v1.2.3.1 - EXPERIMENTAL
- Bug Fix: Better prevention of Stuka dives
- Bug Fix: Brake fan sound played more reliably
- Bug Fix: WHEEL ECAM pages corrected temperature indications
- Bug Fix: Possible fix for missing paper in printer
- Improvement: Removed obsolete sounds
- Improvement: Printer sound shortened
- Improvement: Latest tweaks to printouts
- Improvement: PFD markers updated to 2019 Airbus standard
- Improvement: Background lighting for several displays unlinked from Shift-L
- Improvement: ECAM COND Temp drop to OAT significantly slowed down when both packs are switched off
- Improvement: MAG VAR for runways corrected when using Navigraph
v1.2.3.0 Non Experimental (save your liveries!)
- Bug Fix: Problems with Chrono fixed
- Bug Fix: Some fuel systems issues solved
- Improvement: ND elements updated to newer Airbus standard
- Improvement: Better GSX2 support
- Improvement: More and corrected AIDS prints
- Improvement: Corrected AoA on flare
- Improvement: Silenced 60/70 feet AGL calls
- Improvement: Better fonts for FCU, COMS etc
- Improvement: ND Runway drawing now includes MAGVAR
v1.2.2.2 Experimental
- Bug Fix: Checklist 'Leave Runway on southern hemisphere' issue fixed
- Improvement: All checklist and ASC files included to prevent different version in use
- Improvement: More items printed
- Improvement: minor graphical tweaks in PFD (modern dot and donat)
Support: New loggin added to try to understand lost managed speed (will trigger log entree when speed is set under 120)
v1.2.2.1 Experimental
- Bug fix: OPT ALT calculation short before reaching TOD:
- Bug fix: REC MAX ALT calculation was so far directly connected to OPT ALT calculation with all its bugs...
- Bug fix: Possible time compression (simulation speed factor) taken into account for fuel transfer from CTR to WING tanks
- Bug Fix: Air condition now no longer operating when no BLEED AIR available (via ENGINES or APU) or when packs are off. It now slowly changes accordingly to adapt to ambient temp.
- Bug Fix: ECAM page: Line color corrected right of HOT AIR valve to be amber if HOT AIR pbt off
- Bug Fix: Level off symbol corrected
- Bug Fix: possible for dive in managed descent
- Bug Fix: Possible impact on SPD BRAKE messages related to recent CLB PERF adaptations corrected
- Bug Fix: Only in A321: The CTR TK XFR "OFF" lights were still illuminated even at "Cold and Dark"
- Bug fix OPT ALT: Could display "000" in case of flights shorter than 350nm (was the same for all aircraft types and weights)
- Improvement: OPT ALT, REC MAX ALT and ANTI ICE corrections for A318 adapted according to RW tables (for A318 only they were partly estimated before as no charts available)
- Improvement: "---" for VOR1 CRS now drawn only when no CRS value is entered in RAD NAV page of MCDU, if "000" is entered it is now displayed as "000" and handled like a "360".
- Improvement: Recent fix related to APPR phase (see issue #1145), now enabled as default (no more INI).
- Improvement: Changes in HOLD page: for holdings from the database, the corresponding text captions would be displayed now including the selection arrows
- Improvement: Changes in HOLD page: for holdings not from the database, all the COMPUTED data would be loaded by default now, see issue #1037;
- Improvement: Changes in holdings deletion: when deleting a hold in F-PLN page the following WPT (the same ID) will be also deleted now
- Improvement: Keyboard input module changed to avoid issue with non US keyboard
- Improvement: DES speed updated
- Improvement: AIR COND: Temp change slowed down a bit to make it more realistic
- Improvement: VOR CDI skipped from drawing if no CRS value is entered in RAD NAV page of MCDU
- Improvement: Printer flightlog report more data added - landing speed and landing distance
- Improvement: WX report: alternate airport is now included in the default report
- Improvement: Minor fixes for stability in AIDS print
- Improvement: (MCDU3) OPTIONS / CHECKLIST: Approach Speed and 250 Knots Limiter - Bugs removed, variables adapted and functionality enhanced
- Improvement: Checklist and Copilot function: Oxygen Crew Supply Check deleted from Turnaround CL
- Improvement: Now for every type of aircraft a specific calcuation is done accroding to RW tables
- Improvement: Now deviation from ISA temp is taken into account
- Improvement: Now for every type of aircraft a specific correction for ANTI ICE (ENGINE ANTI ICE, TOTAL ANTI ICE) is done accroding to RW tables
- Improvement: Now for every type of aircraft a specific calcuation is done accroding to RW tables
- Improvement: Now deviation from ISA temp is taken into account
- Improvement: Now for every type of aircraft a specific correction for ANTI ICE (ENGINE ANTI ICE, TOTAL ANTI ICE)
- Improvement: Special handling implemented for flaps/slats to allow to drive into full up position even without HYD when "COLD AND DARK" or "TURN AROUND" state is selected
- Improvement: FLARE height changed
- Improvement: Change to FBW to prevent nose dive in Geo Des.
v1.2.2.0 Non experimental channel -->> NOTE OVERWRITES AICRAFT>CFG, save you liveries! <<--
- Bug fix: Fix to avoid radio set to unusable frequency
- Bug fix: Fixes in speed constraints
- Bug Fix: Fix to avoid erroneously triggered warning sound
- Bug Fix: Missing ND text inserted
- Bug Fix: Fix to solve missing indication of flight control surface movement in test
- Improvement: Complete GSX2 support
- Improvement: Tweaks to checklists
- Improvement: Changes in flight stage triggering
- Improvement: All climb profiles fully overhauled
v1.2.1.0 Experimental (full new build)
(please note the skip in version numbers is due to make them the same as the A320/A321
- Fixed webconnect not working for users who did not have the A318/A319 installed
- Inserted the lower volume sound for wind and wipers as was used for the A318/A319
- Corrected parking codes in aircraft.cfg
- Corrected thumbnails used in livery manager
- Changed descend behavior to use a bit steeper angle to maintain momentum
- Changed climb behavior for A321 IAE
- Corrected Eazyjet serial placard
- Updated METAR decoding for AOC menu's, still some work open
- Fixed EGT indication for CFM engine
- BA now Speedbird for ATC
- Cargo door speed animation corrected
- Reduced pitch sensitivity that causesd issues for some configurations.
- Zoom and pan options made possible in all VC views.
- Fixed climb constraints indications and autopilot respecting them
- Cockpit printer: Zulu date/time now used instead of sim current time
- Adding contrails that were missing from some types
- Changes in sim METAR decoding
- Tweaks to drag factor
- Fix for web connect, Do note there are now TWO web connect apllication:
- A3XXConnectPro_A320A321 and A3XXConnectPro_A318A319 Both are installed in this update!
- Fixes in GA PERF page
- Added code to avoid CTD
- Fix for dissapearing climb constraints after passing waypoints
- Added fields to LoadSheet for FMGS
- Misc fixes in AIDS PRINT
- Cockpit printer: added the loadsheet printout, being activated after the pax boarding complete
- Changes in MCDU text colors
v1.2.0.0 online release
- Please note the 1.2 version number is used to align with the A318/A319.
v1.1.0.1 EXPERIMENTAL
- Wiper sounds reduced in volume
- Gear wind sound reduced in volume awaiting better ideas (by forum user luke123452468)
MCDU tweaks:
- The F-PLN is scrolling continuously now
- Diverse fixes in SPD page (time/utc font, V1 as a SPD value for departure airport)
- Minor change in ATSU page
- Flight Plan is cleared to early after rollout fixed
- Fixes in Holdings:
- Changed the related WPT sequencing on the F-PLN page (for HA and HF type database holdings)
- Proper handling of newly introduced HA and HF type database holdings,
- Including the automatic exit on corresponding conditions
- Introduced the HA-type holdings from Navdatabase (beta!)
- Some holdings (e.g. at departure) didn't load from Navdatabase;
- IMM EXIT was shown too early sometimes fixed
- Introduced the HF-type holdings from Navdatabase (beta!)
- Introduced the HM-type Holdings from Navdatabase (beta!)
- Changes to some holding courses vs magnetic variation
- Conflict in pax numbers solved
- Configurator edited to avoid
- View issue changed
- Pitch Trim adapted
- Divers Fuel ECAM fixes
- Divers small changes in models/textures (new aircon and fuel panels)
v1.1.0.0 STANDARD
- Livery Manager updated
- Tweaks to manuals
- Checklist, several issues solved and others changed as requested by customers
- Gear retraction
- Timing EXT LIGHTS and WXR adjusted in TAXI CL
- Light issue timing issue solved
- Sounds worked on
- Baro reference fixed
- 'NEO' removed from identifier
Holdings tweaks:
- Hold deletion corrected
- Resume issue solved
- minor change to IMM EXIT exit
- Fix for incorrect distance to entry
- TMPY INSERT added
MCDU tweaks:
- Added message: "ENTER DEST DATA"
- ATC button will be linked to AOC no more
- CSTRs now can be deleted directly from F-PLN page
- The ALT CSTR window (from database) persisted after a manual input
- The VOR crs field in RAD NAV page stood empty after user input
- Minor change in CHECK APPR SELECTION message
- Minor changes in VERT REV page
- VNAV angle change
- EFOB/WIND change
- One possible CTD issue solved
- Engine spool up time reduced
- Lower APU volume
- Updated configurator
- Wind shield wiper sounds updated
v1.0.1.3 EXPERIMENTAL
- Tweak to checklist regarding exterior lights
MCDU tweaks:
- Added message: "ENTER DEST DATA"
- Change: ATC button will be linked to AOC no more
- Change: CSTRs now can be deleted directly from F-PLN page
- Fix: the ALT CSTR window (from database) persisted after a manual input
- Fix: the VOR crs field in RAD NAV page stood empty after user inpu
- Minor change in CHECK APPR SELECTION message;
- Minor changes in VERT REV page.
- Vol 9 fixes
v1.0.1.2 EXPERIMENTAL
- New Company Route Editor
- Fix for freezing displays
- Diverse fixes and improvements for checklists
- RAAS Pro now activated
v1.0.1.1 EXPERIMENTAL
- Tweaks to onboard printer to solve issues with IVAO/VATSIm Weather and HOPPIE
- Changes to PED announcement
- Small tweaks to animation timing
- Fixed possible hang condition on checklist (close door issue on forum)
- Changes to loading sequence (possible effect on st elmo's fire issue)
- Fix for fuel reset on multiple engine starts
- Fix for posssile FADEC unpowered issue
v1.0.0.1 STANDARD
- Animation issue solved on A319 CFM window
- All DLL's recompiled with very latest SDK, might solve the St-Elmo's issue
- Vol 9 manual corrected
- Start menu item to livery manager added
- Small tweak to StepbyStep
The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
For guidance on downloading this update, please visit this FAQ.