Latest Update: 2024/09/04
The below log shows all updates for this product since release:
v1.6.2
- Fixed to/from flags in GPS OBS mode.
- Fixed small area of protruding mesh when stabilator tips fitted.
- Updated tail number font logic for compatibility with the livery pack available on the MSFS marketplace
- Reduced minimum selectable passenger weight to 10 lbs/5 kg to allow for dogs or cats!
v1.6.1 - 2024/08/06
- Added option to use falcon71 KLN 90B GPS (this package can be downloaded from https://github.com/falcon71/kln90b).
- Added native internal WTT mode for PMS GTN 750.
- Fixed issue preventing flight plans from loading with default GNS 430W/530W.
- Fixed fuel adjustment issue after restart of JPI EDM 830.
- Fixed last digit of comm radio frequencies with 8.33 kHz spacing not being saved between sessions.
- Tuned ground physics for more accurate crosswind handling.
- Better detection of multi-position switches by input configurator.
v1.5.0 - 2024/04/26
- Fixed airplane creeping post SU15 when engine is run up with brakes or chocks applied
- Fixed a bug preventing airplane from moving away from parking spot in some locations when outside air temperature is well below freezing
- Improved synchronization between navigation light switching and relay click sound when using panel light rheostat
- Fixed air pressure display error in altimeter Kollsman window when set to use imperial units (inHg)
- Improved battery performance slightly at very cold temperatures allowing for better chance of engine start
- Extended the lifespan of the oil pump and oil lines
- Slightly reduced the effectiveness of the fresh air vents
- Improved the display logic for centre of gravity in tablet
- Added additional telemetry variables for force-feedback hardware
- Omitted WT GNS initialization sequence when aircraft is loaded with avionics power already on
- Added update history for Marketplace.
v1.4.7 - 2024/02/09
- Added support for Xbox marketplace platform in sim
- Fixed overstress crash which would occur if view was switched to outside camera following an apron start with cockpit persistence switched off
- Improved engine physics so very high temperature can cause more rapid cylinder wall deterioration
- Improved integrity of cabin against air leaks to allow more efficient heating
- Fixed cabin vent bug which caused vents to not exchange air properly
- Fixed issue which caused vents to pick up too much ambient wind on the ground
- Improved magneto physics so badly worn mags will generally perform worse
- Added new localizations for aircraft description
v1.4.3 - 2024/01/02
- Improved support for loading saved flights
- Fixed repetitive 'tick' in engine sound at around 1,200 RPM
- Added input configurator support for multiple joystick devices with the same name
- Fixed typos in airframe and engine maintenance section descriptions
- Updated hangar aircraft description to match Marketplace release
v1.4 - 2023/11/09
- Updated sound system to use Wwise interface
- Removed HelperA2AserviceMSFS executable and its entry in exe.xml
- Removed master volume slider from tablet as this is now controlled by the MSFS master volume slider
- Restored proper engine preheater functionality
- Slightly improved performance of battery at very low temperature
- Improved handling of custom joystick shortcuts with the new functions added to MSFS SDK in SU13. (The change will take effect after saving config using the updated Input Configurator.)
- Fixed GTN 750Xi not being shown as selected in tablet after restart
- Enlarged environment occlusion to prevent long blades of grass from poking through cockpit floor
- Fixed point and drag interaction when using gamepad
- Fixed symmetry of navigation lights
- Fixed wing loading displayed on tablet when metric units are selected
- Fixed transponder ident light remaining on if lit when avionics power switched off
- Modified beacon lighting to eliminate slight leak onto cabin ceiling
- Removed pitch control out of range log warning
- Updated Hobbs and tachometer counters to show tenths of hours digit as black on white
- Corrected mistyped instance of ‘crankshaft’ in maintenance details of tablet
v1.3.0 - 2023/10/12
– Fixed parking brake not engaging when brakes are somewhat worn
– Fixed accelerated corrosion damage when aircraft is not in use
– Added persistent rudder trim behavior
– Fixed double clicks being necessary at some stations if conducting a second walkaround
– Fixed overstress crash if moving camera position to external instrument view camera via keystroke
– Fixed TDS GTN 750Xi not initializing under certain conditions
– Added function to repair landing lights using the tablet
– Fixed bug where very low FPS could cause runaway physics and animation artifacts
– Added trim acceleration option to the tablet
– Added independent options for metric temperature and air pressure to the tablet
– Linked ADF timer volume to warnings volume slider in the tablet
– Fixed tip tank gauge not powering down when battery was switched off with right tank selected
– Fixed memory leak when engine analyzer page of tablet open
– Added support for rudder axis when auto rudder is selected in MSFS assistance options
– Fixed modelling of left ashtray
– Fixed part of rudder pedals axle being visible from the outside
– Mapped fuel selectors to MSFS “left main”, “left aux”, “2 right main”, “2 right aux” key shortcuts
The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
For guidance on downloading this update, please visit this FAQ.