Latest Update: 28/07/2017 The below log shows all updates for this product since release: v2.06 - Prepar3D V4 compatibility added v2.05 - CFG ...

If you have purchased the Arrow through Steam and you get a .cfg error you will need to download the correct version below and place in the below folder: ...

For optimal performance we have included a switcher tool (PA28 Arrow Model Switcher), located in the Start Menu, which allows you to switch between three co...

To simulate the operation of the real aircraft, the engine oil and battery charge are recorded whenever you stop flying the Arrow III and these will then be...

The aircraft is fitted with an automatic gear extension system. The system automatically extends the landing gear when engine power is reduced with the airs...

The low voltage warning light will illuminate if: The electrical bus voltage drops below approximately 12.5 volts The engine is left below 1400 RPM for...

The engine oil and fuel can be refilled, and the aircraft battery recharged, from the refill menu. This menu can be accessed whilst the aircraft is parked w...

A mixture control lock is provided to prevent activation of the mixture control instead of the pitch control. With the lock engaged, the mixture lever canno...

The aircraft will load up in a 'ready for takeoff' state unless: You are loading a previously saved Arrow III flight, in which case the aircra...

Please check the following items: Fuel flow - To ensure sufficient fuel flow for ignition, confirm that the fuel pump is switched on and the mixture lever ...

A microswitch in the throttle quadrant activates a warning horn and red WARNING GEAR UNSAFE light under the following conditions:  Gear up and power redu...

The fuel pump and turn coordinator gyro sounds were recorded from the real aircraft, however we have included an option to disable these sounds if desired. ...

You can enable or disable the following engine failure/management features: Spark plug fouling Vapour lock Engine failure caused by low oil quantity ...