Just Flight - 146 Professional (P3Dv4/v5)
Product Changelog
Latest Update: 03/09/2021 The below log shows all updates for this product since release: v1.07 - Autopilot pedestal 2D pop-up added - Tweaks to I...
Mon, 6 Sep, 2021 at 10:02 AM
FAQs
To download the manual, please click on the download link below.
To download the paint kit, please click on the download link below. 1.3GB Please note the files size
The tablet EFB allows you to: - Control the doors and stairs - Toggle ground power - Set the fuel load in the wing and centre tanks - Set the cargo l...
Yes, you can hide the yoke by clicking on the "pedal adjuster" on the corresponding side panel
v1.05 update adds pilot and cabin announcements. These will be automatically triggered at the appropriate time based on various events such as altitude, air...
The autopilot controller is located on the aft centre console. You can engage the autopilot by pressing the AP IN button or using the default autopilot togg...
The elevator and ailerons use servo-tabs for the elevator (they look similar to trim tabs) and the flight controls only directly affect the position of thos...
A payload manager can be found in Start Menu > Just Flight
The animations panel, which can be opened via the panel selector, provides control of the passenger, service and cargo doors.
The ground power can be connected via the animations panel, which can be opened via the panel selector.
A comprehensive guide to operating the FMC can be found in Start Menu > Just Flight. The FMC will be connected to the autopilot when LNAV mode is engaged.
The horn will be triggered if: Any door is open The aileron trim is not centred The elevator trim is not in the green band The flap lever is set to 33 ...
The speed card will automatically show the take-off, climb and landing speeds based on your aircraft’s current weight. No user input is required.
Countermeasure pods are configured automatically. Any livery containing the keyword ‘RAF’ in the name will feature countermeasure pods. With a 146-100 varia...
Yes, the ‘Autothrottle engage (TOGA)’ assignment can be used to disconnect the TMS.
The parking brake accumulator is connected to the yellow hydraulic system and it must be pressurised before the parking brake can be engaged. Without the en...
To download the checklist, please click on the download link below.