Just Flight - 146 Professional (XP11)
Product Changelog
Latest Update: 14/10/2021 The below log shows all updates for this product since release: v1.2.3 UFMC fixes: - RTE LEGS page number not updating - ...
Thu, 14 Oct, 2021 at 12:00 PM
FAQs
To download the manual, please click on the download link below.
To download the paint kit, please click on the download link below. 1.3GB Please note the files size
We have now a new section within Navigraph, both via the website and from the the FMC Data Manager.
To use the GTN 750 in the BAe 146 please follow the below steps: 1) In the plugin menu select GTN750 (RXP plugin required) 2) Reload the curren...
Yes. It features extensive optimisation throughout, including hiding parts when they're not in view, running less critical logic elements at lower FPS, ...
No. Most textures are 4k, but when you reduce the simulator's texture quality slider, these textures are reduced to 2k, 1k, etc. dynamically inside the...
This is an accurate simulation of the way the real aircraft’s elevators and ailerons function. The elevator and ailerons use servo-tabs for the elevato...
Yes, this plane has been configured, optimised and extensively tested in VR.
Larger updates will be available to download from the place of purchase. If you have the SkunkCrafts Updater plugin installed, smaller updates are available...
The flaps on the 146 are powerful and require the pilot to actively use the pitch trim to compensate for the change in pitching moment from the flaps as the...
The airstairs can use gravity to extend but they require hydraulic pressure in the Yellow system for retraction. Yellow hydraulic pressure can be produced ...
You can show/hide the yoke by clicking at its base, where it’s mounted to the floor.
The tablet EFB allows you to: Control the doors and stairs Toggle ground power Set the fuel load in the wing and centre tanks Set the cargo load in the...
The horn will be triggered if: Any door is open The aileron trim is not centred The elevator trim is not in the green band The flap lever is set to 33 ...
Move the HSI selector switch, located above the standby attitude indicator on the Captain’s instrument panel, to the RNAV position. Engaging LNAV mode on th...