Latest Update: 18/08/2020
The below log shows all updates for this product since release:
v3.0
- Radar and the GTN 750 now have matching clickable spots to open and close the pop-up panel
v2.9
New Features
- New realistic air start procedure. See Manual.
- Prop spool down animation is now slower on ground. DISCLAIMER: The upside is now slower spool down but the downside is in air the spool down takes like 2 minutes to stop due to wind milling. This is a limitation issue for this type of air file.
- Now you can save flight with chocks, plugs and windshield cover enabled and when you load the flight the next time they will now load enabled. Now when either engine starts these options will disable. We use to use the parking brakes but this will no longer work with our new feature.
- Flysimware's Transponder in the GTN models were not enabled.
Bugs & Updates
- The prop animated the wrong direction for the feathered position. Fixed
- P3D beacon bleeding into cockpit is now fixed due to our new DLL donated by Doug Dawson.
- Prop angle ground minimum reduced from 4 degrees to 0. Now you can move the throttle slightly forward for taxi movement keeping the throttle below the ground idle line so the engine sound does not increase.
- Flysimware's Transponder always displays 4 digits when starting with a zero. For example you can now enter 0123 or 0000.
- Cabin and VC dome light updated.
- Flight dynamics update. Increased reverse thruster. Improved airframe and flaps drag. Improved engine torque scale and sensitivity.
- Airspeed Barber pole updated to mach 0.57 per Mitsubishi POM.
- Windshield glass is more clear and the tinted green glass which is optional is slightly lighter.
v2.7
New Features
- New installer for P3D v5.
Bugs & Updates
- Digital clock was updated with ambient temperature reading.
v2.5
New Features
- PRODUCT INSTALLER NOW INCLUDES A P3D V4 INSTALLATION OPTION WITH NEW 64BIT DLL'S.
- Major change for how the HSI & DME digital info is dispolayed
- IF THE HSI DME SPEED IS NEAR ZERO OR YOUR FLYING PARALLEL TO THE STATION THEN THE TIME WILL DISPLAY 9999.
- DME WORKS FOR STAND-ALONE AND ‘REGULAR’ DME/VOR STATIONS.
- LEADING 0'S SUPPRESSED ON BOTH THE HSI AND SPERRY DME GAUGE.
- HSI DISTANCE WORKS FOR BOTH VLOC AND GPS WAYPOINTS.
- SPERRY UNIT DISPLAYS DISTANCE AND TIME TO 1 DECIMAL PLACE.
- MAX TIME OF 999.9 INDICATES A/C IS NOT MOVING TOWARDS THE DME STATION.
Bugs & Updates
- AIRCRAFT TITLE NAME UPDATED FOR FSX & P3D.
- MISSING SOUND FILES FOR P3D WARNING LOG UPDATED TO NOT SHOW THESE WARNINGS.
- KOHLSMAN DISPLAY ON THE BACKUP ALTIMETER UPDATED FOR ACCURACY.
- ALTIMETER NOW INDICATES BELOW SEA LEVEL.
v2.4
New Features
- GPS lateral capture mode will remain captured outside of 2NM once captured at 2NM but outside of 12NM it will disengage but can recapture at 12NM.
- Autopilot VS and IAS no longer need the ALTSEL mode on to hold pitch modes. With ALTSEL mode on the preselected altitude set will capture.
- The GNS530 message label now is solid rather than flashing. When in the VNAV page the MENU option can turn off all messages for the entire flight.
- Glide Slope indicators now move out of sight with no active signal and no voltage.
- Removed the beacon sound since most users did not like the loud sound from the VC.
Bugs & Updates
- Conditioner lever in the cutoff position will feather as usual but the prop will no longer take 4 minutes to stop during flight. Should take less than 20 seconds!
- HSI CDI animation distance fixed and will now move all the way to the sides.
- Go around mode updated. Please read the new GA section added to the user manual.
- Flight director no longer protrudes through the glareshield during aircraft reload or saved flights. This was a bug that you may or may not have noticed.
- Flight director no longer protrudes through the glareshield during aircraft reload or saved flights. This was a bug that you may or may not have noticed.
- MU2B user manual and GNS530 manual are updated and available to download. The user manual now has 2 new entry's for the table of contents. Version 2.4 updates” and "Key Assignments". Includes tips to what pages were updated and needs to be read.
v2.3a
- The GTN 750 config file was corrupted and will not update from the config tool.
- We also created instructions for when using the GTN 750 config tool with our products.
v2.3
New Features:
- Updated installer with new features and better information
Bugs & Updates:
- Autopilot updated for bugs
- GPU now needs parking brake on and both generators off to be active Ground splash lights will now turn off with main bus below 8 volts Alerter audio plays when you deviate 300 FT of the preselected altitude but not when you first pass through 300FT of the preselected altitude Turn Coordinator updated for accuracy Sperry DME updated for instant calculation and mising dashes for no signal HSI distance now shows all dashes for no signal
v2.2:
- HSI CDI will now follow the GPS flight plan using the GNS 530
-GNS 530 updated for errors
- GTX 330 updated for full realism
- HSI flags updated
- Digital clock updated
- New integrated WX Advantage Radar by Rex / Milviz
- (Works for FSX / FSX:SE / P3D)
- (Captain Sim / ASNRadar instructions now include Reality's WX 500)
v2.1:
- New EGT values
- New RPM values based on the conditioner lever
- Added a nose section to the VC model for visuals
- VS and IAS mode button will disengage the pitch hold once pressed
- Flysimware's new transponder unit was added (removed from the GTN model)
- Lowering the gear now resets the gear horn silence mode
- New checklist on the kneeboard
- Attitude pitch scale got calibrated for accuracy
v2.0:
- Engine inlet switches (Fixed)
- Blemish on upper left wing updated
v1.9:
- Compass direction updated
- Flooding updated for online servers
- Darker interior textures
- New 3D shockwave lights
- FSX Steam Edition and Prepar3D compatibility added (all versions)
v1.8:
- Lights now work from key commands
- Prop blur effect updated
- User manual now shows avionics switch location
- Rudder and elevator trim tab animation updated
- Ground power unit added to model
- All lights now have a battery load and we included other system loads
- Annunciator texture updated
- DC and AC meters updated
- P3D V3 installer
v1.7:
- Updated flight dynamics (higher idle, increased power and increased flap drag)
- Updated flight director (FD)
- Updated HSI NM digital readout, which now uses GPS flight plans and NAV 1
- Fixed DME delay issue
- Beacon will now flash, using a new custom effect to match the rotating speed for better visuals
v1.6:
- Autopilot oscillating bug fixed
- Increased drag factor for descending and approaching
- Increased static thrust for accurate speeds
- Updated coffee maker texture
- Ability to hide green plastic tint
- Updated engine sounds - Improved exterior sounds, and seperate sounds for left and right engines with stereo effects
- GTN750 now has case hotspot for 2D popup
- Updated flight dynamics - Reduced the lift factor to remove excessive flaring. Improved balance, with less trim adjustments now needed for stable flight and more accurate takeoff trim setting.
- Reduced the low prop RPM setting to fix the 'sticky taxi' and excessive power on approach issues
- Updated Interior chrome textures
- Updated AP modes - FD for the nav mode is fixed. VS and IAS lights stay on when altitude is captured as they engage the altitude lock. If you are using IAS mode and you reach your desired altitude the IAS will swap to VS mode once captured. Go around mode now disbles autopilot turns on the flight director with a 800 ft climb.
- Reality XP WX500 weather radar now works using the GNS and GTN models - There are now only 2 models which contain all the available features. If you do not own the radar it will be shown as a static model. If you do own the weather radar it will now be shown and will be usable. This gives you more options with less models and better night textures minus animated knobs.
- GTN 750 now has the abiltiy to do an LVP approach
The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
For guidance on downloading this update, please visit this FAQ.