Latest Update: 2024/02/27
The below log shows all updates for this product since release:
v1.7.1
- Parking brake is now set when on the Apron -Reduced starter torque to fix jumpy propeller -Reduced unusable fuel quantity to 0.79 gallons
v1.7.0 RELEASED NOVEMBER 4, 2023
- Flight model tuning to bring STOL performance close to RW data.
Update - 30/11/2021
- Further improved glide ratios and STOL behaviour
- Added ski variant
- Downgraded ski & gear variants' engine to 80hp
- Added floatplane variant with 110hp engine and scythe propeller
- Fixed fogged glass that appeared after SU6
- Fixed erroneous HUD readouts in spot view
Update - 28/07/2021
-Added Wwise sound package
-Modified the aircraft to accommodate code changes of SU5
v1.10 Hotfix - 27/02/2021
- Programmatically forced alternator to the on position to fix battery drain issue reported by some users
- Programmatically auto-calibrated altimeter pressure upon aircraft initialisation, to alleviate the issue reported by some customers that the altimeter reads 28.00inHg on startup.
- IMPORTANT: auto-calibration only happens once, when the aircraft first loads. It is the virtual pilot's responsibility to maintain a properly calibrated instrument from that point on.
v1.10 - 23/10/2020
- - Flaps: reduced drag, increased lift
- - Flaps: changed to mechanical and now respond almost instantly to changes
- - Engine: Reduced aircraft top speed
- - Engine: Improved engine response across entire envelope
- - Aircraft will now decelerate at low RPM
- - Electrical system: Modified electrical system to account for new engine behaviour
- - Added Parking Brake for convenience
- - 44N: Modified snow property on some items to make them seem "fresh"
- - Added some more clutter objects around airport
- - Changed fuel tank selector setting from "ALL" to "BOTH" to reflect correct setting.
The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
For guidance on downloading this update, please visit this FAQ.