Latest Update: 2023/08/18
The below log shows all updates for this product since release:
v0.5.8
- TDS GTNXi autopilot compatibility fixes
- Missing cockpit glass effects (including rain) – fixed
- Missing tail navigation light (Turbo Arrow III) - fixed
v0.5.7 - 2023/08/04
- Working Title GNS autopilot issues - fixed
- KR85 ADF ANT mode logic added
- Storm window not animated when using exterior camera – fixed
- Autopilot panel texture issues – fixed
- Dome light texture improved
- Cockpit camera can no longer be moved outside cockpit area
- Tweaks to autopilot roll and navigation hold accuracy
- NAV/GPS switch logic changes for improved compatibility with WT GNS, PMS-50 GTN and TDS GTNXi
v0.5.6 - 2023/04/03
- SU12 compatibility
- Xbox compatibility (Marketplace only)
- Latest TDS GTNXi models/textures added
- Compatibility with latest versions of Working Title GNS, PMS-50 GTN and TDS GTNXi (including new autopilot logic)
- EFB functionality upgrades:
- Import your SimBrief flight and view a summary or scrollable full OFP
- Monitor your position in real time using a map view with tracking, zoom and pan options
- Explore and view your Navigraph charts, with automatic selection of departure and arrival airports based on your SimBrief OFP, and ability to favourite charts for quick reference
- Use a notepad for making notes during the flight, particularly useful for noting down clearances and taxi instructions
- Interactive checklists, in addition to the existing MSFS checklist support
- A top-of-descent calculator with the option to manually input altitudes, speeds and descent requirements or to have those sync'd from the sim
- An on-screen/virtual keyboard, especially useful for VR users
- METARs for your SimBrief OFP departure, arrival and alternate airports
- Animations and cockpit interactions updated for compatibility with LOCK interaction mode and Xbox
- Flight model updates (greater pitch stability and better ground handling)
- Trim sensitivity slider added to EFB, allowing you to fine tune the sensitivity of the pitch trim
- Improved spark plug fouling simulation
- Vertical speed hold hidden clickspot added to autopilot panel - with altitude hold engaged, clicking on the vertical speed clickspot will engage vertical speed hold mode, holding the vertical speed that existed at the point of engagement
- Dynamic baggage added - a variety of baggage will appear in the baggage compartment, depending on the selected payload weight
- Smoother cockpit pushbutton animations
- GNS 530/430 screens resized to prevent edge clipping
- Support added for SET ELECTRICAL FUEL PUMP 1 control assignment
- Throttle quadrant cursor icons (hand/grab) updated to make it easier to see when your cursor is moving between levers
- Improved look for illuminated lights/annunciators
- Instrument camera preset names fixed, additional presets added for passenger and baggage views
- Interactive points added for improved ambient sounds in cockpit with doors open
- Manuals updated
- TDS GTNXi Smart Glide compatibility added
- EFB up/down rotation clickspots added to bezel
- Red object visible in landing light when using drone camera – fixed
v0.5.5 - 2022/06/30
- SimConnect autopilot events (e.g. HEADING_BUG_SET) fixed
v0.5.4 - 2022/06/23
- Pilot model replaced with MS/Asobo pilot avatar
- ICAO type data updated (used for AI/multiplayer model matching)
- Heading/course bug select control assignments fixed (used by Honeycomb Bravo and other hardware)
- Fuel pump control assignment now selects LO rather than HI position
- Tooltips added for ELT and alternate air controls
- Turbo Arrow III placard speeds/limitations adjusted to match real aircraft
- Propeller material tweaked to avoid sunlight reflections
v0.5.3 - 2022/02/24
- Heading bug control assignments fixed
- Elevator trim speed reduced for finer control (speed reduced further if electric trim button is off)
v0.5.2
- Autopilot roll control logic rewritten for greater reliability and accuracy
- HUD flap scale fixed
- Rudder trim animation improved
- Elevator trim animation improved
- NAV 1 ident not audible - fixed
- DATCON and HOBBs animations fixed
- GPS 100 heading value no longer affected by drift
- Autopilot LOC mode fixed
- Autopilot now supports on/off control assignments
- FDE improvements
- Pilot no longer visible in hanger view
- Minor sound tweaks
- ASI TAS scale position now included in state saving
- TDS GTNXi integration added
- Updated manual
v0.5.1 - 2021/11/19
- Elevator trim axis has limited range - fixed
- PMS GTN 650/750 not powering up (bundle only) - fixed
- COM/NAV radio volume and power logic improvements
- Further tweaks to cockpit instrument reflections
- Cockpit screen clickspot logic improvements
- Landing light effect repositioned for better match with model
- Pilot visible when cold & dark - fixed
v0.5.0
- Exterior model parts (e.g. pilot) showing up in cockpit when a flight is ended - fixed
- EFB tab black edges - fixed
- Version number is now shown on the top bar of the EFB
- OAT is now shown on the top bar of the EFB (Fahrenheit or Celsius depending on selected MSFS unit of measure)
- Wheel touchdown effects added
- Arrow III, Turbo Arrow III and IV variants now have unique rather than shared state saving
- The alternate air lever can now be controlled using the SET ANTI ICE and TOGGLE ANTI ICE assignments
- Cabin heat control interactions fixed
- Beacon light no longer remains off when in cockpit view
- PUMP ON and PUMP OFF assignments can now be used to control the fuel pump switch
- Elevator trim axis direction reversed to match behaviour of default aircraft
- Panel lighting will now be set according to weather conditions as well as time of day as part of the aircraft states
- KN62 DME speed/time not shown after flight has been restarted - fixed
- Autopilot roll instability - fixed
- Autopilot roll knob can now be controlled using the AILERON TRIM LEFT/RIGHT assignment
- Radio lights can now be manually adjusted with SET NAV LIGHTS assigned
- Elevator trim wheel tooltip and mouse-wheel sensitivity - fixed
- Dome light knob tooltip - fixed
- Dome light will now fail if the overhead lights CB is pulled
- COM/NAV volume now included in state save
- Propeller texture/material tweaks
- Transponder ident added
- Exhaust heat haze direction fixed
- Yoke timer usability in VR fixed
- Sun visor reflections fixed
- GPS 100 headwind/tailwind logic fixed
- Exterior lighting effects improved
- Turbo Arrow III rudder trim indicator fixed
- Oxygen cylinder valve 'PRESSURE DUMP SWITCH' control assignment fixed
- Instrument reflections reduced
- Correct ASI and RPM scales added to HUD
- Missing co-pilot fixed
- Mixture lever can be moved to idle cut-off with the lock engaged but the engine doesn’t cut - fixed
v0.4.0
- PMS-50 GTN 650 integration
- Autopilot control assignments fixed
- Landing gear lights dim more with panel lighting switched on
- EFB sounds on/off clickspots added
- Cockpit texture tweaks for improved appearance
- KN62 inner knob animation fixed
- Sim Update V control system compatibility fixes:
- Cabin heating controls
- Parking brake lever
- Window latch
- HSI and DI knobs
- GPS 100 ON/OFF button
Note: Further changes will be made to improve compatibility with the new Sim Update V control system. In the meantime, we suggest using the Legacy cockpit interaction system (see FAQ for more info: Cockpit Interaction System)
v0.3.0 - 2021/07/19
- Autopilot logic fixes (including bank hold, altitude hold accuracy)
- Landing gear lights now dim when the panel lighting is switched on
- AP nav 1/2 selector fixed
- Radio frequency control assignments fixed
- Turbo Arrow IV cockpit texture resolution no longer degraded based on MSFS texture setting
- Whiskey compass accuracy improved
- External equipment now visible in VR
- Minor sound fixes and EFB sounds added
- KN62 inner knob push/pull for 0.5 KHz selection added
- KMA20 COM 1 receive logic fixed
- Cabin heat now prevents windshield icing
v0.2.1 - 2021/06/16
- Throttle initialising to 100% when starting on the runway - fixed
- GNS/GTN integration – fixed
- Throttle initialising to 100% when starting on the runway (Turbo Arrow III/IV) - fixed
v0.2.0 - 2021/06/15
- Portable oxygen system added (consumption rate varies depending on altitude and number of passengers, can be refilled on the ground)
- Improved cockpit lighting
- EFB brightness controls and battery power logic added
- VR compatibility tweaked for easier use of GTN 750
- Audio ident/selector fixes
- Autopilot altitude hold logic tweaks
- KX170/KX175 COM and NAV frequencies can now be controlled using the 'Increase/Decrease COM/NAV (WHOLE/FRACT)' assignments
- Turbocharger/manifold pressure logic improvements
- Aileron inputs disabled whilst autopilot is engaged to prevent control issues
- High oil pressure fixed
- Custom registration decals resized/repositioned
- VR zoom issue on Turbo Arrow III fixed
- Lower tail navigation light glass fixed
- Manifold pressure gauge night lighting fixed
- Turbo Arrow IV paint kit PSD fixed
- FDE improvements and fixes
- RPM drop with prop lever movement fixed
- Autopilot nav source select can now be assigned to a control
- Dome light non-illuminated texture fixed, state of knob now saved
- Missing German flag added to tail of D-EAIV
- D-ERMT registration alignment fixed
- Fuel state is now saved
- Turbo Arrow IV prop spinner now more reflective/shiny
The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.
To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.
For guidance on downloading this update, please visit this FAQ.