Latest Update: 2023/08/18

The below log shows all updates for this product since release:

v0.10.8

- TDS GTNXi autopilot compatibility fixes

- Missing cockpit glass effects (including rain) - fixed

v0.10.7 - 2023/08/04

- Working Title GNS autopilot issues - fixed

- KR85 ADF ANT mode logic added

- Storm window not animated when using exterior camera – fixed

- Autopilot panel texture issues – fixed

- Dome light texture improved

- Cockpit camera can no longer be moved outside cockpit area

- Tweaks to autopilot roll and navigation hold accuracy

- NAV/GPS switch logic changes for improved compatibility with WT GNS, PMS-50 GTN and TDS GTNXi

v0.10.6 - 2023/04/03

- SU12 compatibility

- Xbox compatibility (Marketplace only)

- Latest TDS GTNXi models/textures added

- Compatibility with latest versions of Working Title GNS, PMS-50 GTN and TDS GTNXi (including new autopilot logic)

- EFB functionality upgrades:

• Import your SimBrief flight and view a summary or scrollable full OFP
• Monitor your position in real time using a map view with tracking, zoom and pan options
• Explore and view your Navigraph charts, with automatic selection of departure and arrival airports based on your SimBrief OFP, and ability to favourite charts for quick reference
• Use a notepad for making notes during the flight, particularly useful for noting down clearances and taxi instructions
• Interactive checklists, in addition to the existing MSFS checklist support
• A top-of-descent calculator with the option to manually input altitudes, speeds and descent requirements or to have those sync'd from the sim
• An on-screen/virtual keyboard, especially useful for VR users
• METARs for your SimBrief OFP departure, arrival and alternate airports

- Animations and cockpit interactions updated for compatibility with LOCK interaction mode and Xbox

- Flight model updates (greater pitch stability and better ground handling)

- Trim sensitivity slider added to EFB, allowing you to fine tune the sensitivity of the pitch trim

- Improved spark plug fouling simulation

- Vertical speed hold hidden clickspot added to autopilot panel - with altitude hold engaged, clicking on the vertical speed clickspot will engage vertical speed hold mode, holding the vertical speed that existed at the point of engagement

- Dynamic baggage added - a variety of baggage will appear in the baggage compartment, depending on the selected payload weight

- Smoother cockpit pushbutton animations

- GNS 530/430 screens resized to prevent edge clipping

- Support added for SET ELECTRICAL FUEL PUMP 1 control assignment

- Throttle quadrant cursor icons (hand/grab) updated to make it easier to see when your cursor is moving between levers

- Improved look for illuminated lights/annunciators

- Instrument camera preset names fixed, additional presets added for passenger and baggage views

- Interactive points added for improved ambient sounds in cockpit with doors open

- Manuals updated

- TDS GTNXi Smart Glide compatibility added

- EFB up/down rotation clickspots added to bezel

- Touchdown sounds fixed

v0.10.5 - 2022/06/30

- SimConnect autopilot events (e.g. HEADING_BUG_SET) fixed

v0.10.4 - 2022/06/23

- Pilot model replaced with MS/Asobo pilot avatar

- ICAO type data updated (used for AI/multiplayer model matching)

- Heading/course bug select control assignments fixed (used by Honeycomb Bravo and other hardware)

- Tooltips added for ELT and alternate air controls

- Propeller material tweaked to avoid sunlight reflections

v0.10.3 - 2022/02/24

- Heading bug control assignments fixed

- Elevator trim speed reduced for finer control (speed reduced further if electric trim button is off)

v0.10.2

- Autopilot roll control logic rewritten for greater reliability and accuracy

- HUD flap scale fixed

- Rudder trim animation improved

- Elevator trim animation improved

- NAV 1 ident not audible - fixed

- DATCON and HOBBs animations fixed

- GPS 100 heading value no longer affected by drift

- Autopilot LOC mode fixed

- Autopilot now supports on/off control assignments

- FDE improvements

- Pilot no longer visible in hanger view

- Minor sound tweaks

- ASI TAS scale position now included in state saving

- TDS GTNXi integration added

- Updated manual

v0.10.1 - 2021/11/19

- Elevator trim axis has limited range - fixed
- PMS GTN 650/750 not powering up (bundle only) - fixed

- COM/NAV radio volume and power logic improvements
- Further tweaks to cockpit instrument reflections
- Cockpit screen clickspot logic improvements
- Landing light effect repositioned for better match with model
- Pilot visible when cold & dark - fixed

v0.10.0

- Exterior model parts (e.g. pilot) showing up in cockpit when a flight is ended - fixed
- EFB tab black edges - fixed
- Version number is now shown on the top bar of the EFB
- OAT is now shown on the top bar of the EFB (Fahrenheit or Celsius depending on selected MSFS unit of measure)
- Wheel touchdown effects added
- Arrow III, Turbo Arrow III and IV variants now have unique rather than shared state saving
- The alternate air lever can now be controlled using the SET ANTI ICE and TOGGLE ANTI ICE assignments
- Cabin heat control interactions fixed
- Beacon light no longer remains off when in cockpit view
- PUMP ON and PUMP OFF assignments can now be used to control the fuel pump switch
- Elevator trim axis direction reversed to match behaviour of default aircraft
- Panel lighting will now be set according to weather conditions as well as time of day as part of the aircraft states
- KN62 DME speed/time not shown after flight has been restarted - fixed
- Autopilot roll instability - fixed
- Autopilot roll knob can now be controlled using the AILERON TRIM LEFT/RIGHT assignment
- Radio lights can now be manually adjusted with SET NAV LIGHTS assigned
- Elevator trim wheel tooltip and mouse-wheel sensitivity - fixed
- Dome light knob tooltip - fixed
- Dome light will now fail if the overhead lights CB is pulled
- COM/NAV volume now included in state save
- Propeller texture/material tweaks
- Transponder ident added
- Exhaust heat haze direction fixed
- Yoke timer usability in VR fixed
- Sun visor reflections fixed
- GPS 100 headwind/tailwind logic fixed
- Exterior lighting effects improved
- Instrument reflections reduced
- Correct ASI and RPM scales added to HUD
- Missing co-pilot fixed
- Mixture lever can be moved to idle cut-off with the lock engaged but the engine doesn’t cut - fixed

v0.9.0

- PMS-50 GTN 650 integration

- FDE Tweaks

- Autopilot control assignments fixed

- Landing gear lights dim more with panel lighting switched on

- EFB sounds on/off clickspots added

- Cockpit texture tweaks for improved appearance

- KN62 inner knob animation fixed

- Sim Update V control system compatibility fixes:

• Cabin heating controls
• Parking brake lever
• Window latch
• HSI and DI knobs
• GPS 100 ON/OFF button

Note: Further changes will be made to improve compatibility with the new Sim Update V control system. In the meantime, we suggest using the Legacy cockpit interaction system (see FAQ for more info: Cockpit Interaction System) 

v0.8.0 - 2021/07/19

- Autopilot logic fixes (including bank hold, altitude hold accuracy)

- Landing gear lights now dim when the panel lighting is switched on

- AP nav 1/2 selector fixed

- Whiskey compass accuracy improved

- External equipment now visible in VR

- Minor sound fixes and EFB sounds added

- KN62 inner knob push/pull for 0.5 KHz selection added

- KMA20 COM 1 receive logic fixed

- Cabin heat now prevents windshield icing

v0.7.1 - 2021/06/16

- EGT typo in engines cfg - fixed

- GNS/GTN integration – fixed

- EGT typo in engines cfg (Arrow III) – fixed

v0.7.0 - 2021/06/15

- Improved cockpit lighting 

- EFB brightness controls and battery power logic added

- VR compatibility tweaked for easier use of GTN 750

- Audio ident/selector fixes

- Autopilot altitude hold logic tweaks

- Landing gear drag reduced

- KX170/KX175 COM and NAV frequencies can now be controlled using the 'Increase/Decrease COM/NAV (WHOLE/FRACT)' assignments

- Aileron inputs disabled whilst autopilot is engaged to prevent control issues

- RPM drop with prop lever movement fixed

- Dome light non-illuminated texture fixed, state of knob now saved

- Autopilot Nav source select can now be assigned to a control

- Fuel state is now saved

v0.6.0 - 2021/05/28

- Engine start exhaust and heat blur effects added

- Engine RPM fixed

- Improved exterior lighting

- Autopilot altitude hold 'jitter' fixed

- Altimeter flag is no longer visible when above 10,000ft

- Realism of oil pressure drop with movement of prop lever improved (more gradual)

- Chocks and tie-downs now prevent movement of aircraft on ground

- Chocks and tie-downs are now removed automatically if pushback is requested

- ADF frequency resetting to default value of 890 - fixed

- Custom logic added for smooth ADF needle movement (no longer jumps instantly between positions)

- HSI course pointer and heading bug animation now smoother

- 'Set Electric Fuel Pump 1' control assignment is now supported for Honeycomb hardware users

- NAV 2 OBS needle now returns to centre position when VOR signal is lot

- Nav/radio light knob logic improved for Honeycomb hardware users (automatic selection of radio lighting when flying at night and selecting nav lights on)

- GNS 430 pop-up sometimes not working - fixed

- Numerous flight dynamics fixes and improvements 

v0.5.2 - 2021/05/08

- NAV/GPS switch initialisation issue when cold & dark (causing repeated click sounds) - fixed

- Cockpit instrument lighting is now visible from exterior view

v0.5.1 - 2021/05/07

v0.5.0 - 2021/04/16

- Numerous flight dynamics fixes and improvements

- PMS50 GTN 750 will now be correctly restored on aircraft load, long press for HOME button now supported, GNS 430/530 now disabled when GTN 750 is selected to reduce chances of CTDs, other minor fixes

- Door decal not attached to door - fixed

- OBS 1 course card animation fixed

- ICAO code updated to P28R

- KN62 unit overlapping with GNS configuration selected - fixed

- NAV and GPS outputs to OBS 1/2, HSI and autopilot now require the associated radio/GPS to be powered on and a valid signal tuned

- NAV/GPS source switch added, replacing the hidden click spot

- Blanking panel added in place of the GPS 100 when the GTN 750 configuration is selected

- COM2/NAV2 volume inoperative with GTN 750 selected - fixed

- White tail navigation light fixed

- GPS 100 lat/lon fixed

- Clean windshield texture improvements

- GNS 430/530 bezel clipping display - fixed

v0.4.0 - 2021/04/15

- PMS50 GTN 750 integration added

- GNS dual configuration added (GNS 530 COM/NAV1, GNS 430 COM/NAV 2)

- KMA 20 logic changes

- Ground service support added (marshaller and fuel truck)

- ASI TAS scale fixed

- Yoke timer now takes simulation rate into account

- KN62 DME speed now takes bearing to/from DME into account

- Emergency landing gear logic fixes

- KR85 ADF will now automatically search for fractional frequencies (e.g. 383.5 with 383 selected)

- CDI now works with RNAV approaches

- Reference speeds corrected

- GNS 430/530 voltage requirements reduced

- Landing gear auto extension light now flashes when system is disabled (via lever)

- EFB will now power back on automatically if previously hidden using the ICOMM switch with the power on

- Propeller exercise check added to ground power checklist

- Magneto/ignition position and GNS 530/430 power states now saved/restored when state saving is enabled

- KN62 display no longer illuminated at night with power off

- Aircraft stuck at hold short during pre-flight animation when starting from the runway - fixed

- Sound fixes:

• optimised brake/rudder pedal audio
• ground roll volume
• adjusted interior startup/shutdown volume
• adjusted low RPM engine volume
• improved surround effect of engine noise
• improved wind noise
• improved fuel pump loop
• improved audibility of interior gear retraction/extension audio

- Sound additions:

• background panel rattle on low engine RPMs
• wind noise when door is closed but not latched
• vacuum driven gyro noise
• new samples for emergency gear lever, annunciator test button, EGT target knob and mixture lock

Please note: The development team are busy working on a variety of fixes and improvements to the flight dynamics. Those are undergoing extensive testing and will be released as soon as possible.

v0.3.0 - 2021/03/26

- Checklists added (manual and automatic/co-pilot modes supported)

- Direction Indicator (DI) bezel now illuminated by panel lighting

- Whiskey compass animation fixed

- Sun visor animation now visible from exterior

- GNS 530 display now remains visible after GPS unit toggle on EFB is used

- Landing gear auto-extension logic fixes

- Airspeed indicator (ASI) needle accuracy issue fixed

- Airspeed indicator (ASI) TAS scale fixed

- Yoke timer paused when yoke hidden - fixed

- ON/OFF control assignments now supported (e.g. lights, master/alternator)

- Autopilot OMNI/VOR hold disengaging after flying overhead VOR - fixed

- Autopilot mode engagement logic fixes

- HSI no longer drifts

- Aircraft type now included in ATC calls

- inHG baro scale added to standby altimeter

- Yoke visibility, emergency gear lever, co-pilot, chock, tie-down and towbar -selections, COM/NAV/ADF frequencies and fuel load are now included in state saving

- Chock, tie-down and towbar selections can now be made via LVars for use by cockpit builders, VR users etc

- KMA 20 audio selector logic fixes

- Paint kit horizontal stabiliser texture fixes

- Yoke pitch animations added to exterior model

- Further VR compatibility tweaks (including larger clickspots for small controls, fixed EFB power and GPS 100 buttons)

- COM/NAV volumes now set to 100% when ending flight in Arrow III to prevent issues with other aircraft

- Flap lever vibration when using control axis - fixed

- GNS 430/530 not powering up when avionics master control is assigned - fixed

(Please note that improvements to the flight dynamics are ongoing, within any limitations imposed by MSFS)

v0.2.0 - 2021/03/19

- Icing effects added

- Propeller animations fixed

- Improvements to exterior surface detail and decals added for higher texture resolution in previously lower resolution exterior and cockpit areas

- GNS 430/530 - Power functionality and backlighting added, 2D pop-outs fixed

- Fuel selector can now be controlled using 'FUEL SELECTOR 1 LEFT/OFF/RIGHT' assignments

- Tweaks to autopilot roll control

- Improvements to FDE - idle RPM fixed, vibration/wobble reduced

- VR compatibility fixes

- Support added for the following 'set' control assignments - Battery, alternator, beacon light, landing light, navigation lights, strobe lights, pitot heat

- Landing light illumination area increased

- Cockpit texture resolution no longer reduced with lower graphical settings selected

- Autopilot and navigation lights circuit breakers now affect associated systems

- Autopilot heading mode active without autopilot engaged - fixed

- Tutorial flight files added

- Engine priming and start tweaked for greater realism, manual updated to provide more information on engine priming before start up

- Wind direction reversed on EFB - fixed

- Navigation mode will now default to VLOC/NAV unless state saving is enabled and GPS mode was selected on previous flight

- CDI on NAV/OBS 1 now responds correctly to GPS course

- GPS 100 sometimes stuck in self-test mode - fixed

- Manual changes to transponder code sometimes not triggering response from ATC - fixed

- Transponder mode changes not being recognised by ATC - fixed

- Rudder trim direction reversed - fixed

- COM and NAV audio idents - fixed

- EFB and GPS 100 displays no longer refresh when not in use for improved performance (FPS). EFB automatically turns off when hidden.

- OAT indicator fixed

- ELT set to ON when selecting cold & dark state - fixed

- Environment (e.g. cloud, taxi markings) sometimes visible in footwell - fixed

- inHG barometric setting option added to altimeters

- Mixture 'decrease incrementally' assignment fixed

- Custom registration decals now remain visible at a greater distance (lower LOD)

- Gear mechanism animation fixes

The product download in your account is updated as and when updates are released, so if purchasing after any of the given dates your product will include all updates prior to that date.

To download updates you will need to re-download the product from the 'Your Orders' section of your account which you can log into by clicking here.

For guidance on downloading this update, please visit this FAQ.