Captain Sim - 727 Professional
FAQs
This update will upgrade the 1.3 Just Flight CD version only to version 1.5 and also allows 727 Professional to work in FS2004. This update also corrects th...
You will need the original Just Flight 727 Professional CD ROM to allow installation of this update. This will update the 1.3 Just Flight CD version onl...
Unfortunately this product is not compatible with Flight Simulator X. Captain Sim, the developers behind 727 Professional, have developed an entirely ne...
The DME has to have its green 'DME hold' button switch ON for the radio panel to display the DME readout.
1. Turn all crew members knobs on the audio panel ON. 2. Make sure the buttons for each voice is illuminated on the radio stack look in the manual under...
Please try the following: Find the file: Captain_Sim\727\voice\b727Snd.ini section , set Equipment = 0 In section set parameter Equipment to zero, i....
Load the standard FS Cessna. Lean the mixture to stop the engine, turn off the magnetos, turn off the avionics master switch and turn off the master electric...
The engines will start and operate correctly if the exact procedures are followed in the HTML manual page 6 for APU start "Cockpit APU start" and ...
It is only available when using the virtual cockpit. It is in the center console in front of the throttles.
Shut the throttles to idle then press the F2 key to operate the engine reversers then hold down the F2 key to increase the thrust whilst in reverse then pres...
The APU ammeter will only show a reading when current is being drawn by a load from the APU and not just because it is running. When the main engines are ru...
Go to your 'Start' menu, 'Setting' and open your 'Control Panel', from here open your 'Regional Settings'. It is importa...
First of all the key commands have to be assigned in FS2002/options/controls/assigments. Please assign them to the following: keys Pilot's Sliding W...
Make sure Flight Simulator is NOT running and then open the TCE editor via the Windows Start button, All programs, Just flight, 727 Professional, Texture an...
Use the right mouse button. You need to click on the area just above the ADF tuning knob to select the lower band.
Users who have updated their installation of Microsoft's FS2004 to Version 9.1 via Microsoft's official patch may find that Flight Simulator wil...